PBS ProTrack Performance Brake Pads (FRONT) 2001PT - Volkswagen Golf R MK7/MK8
PBS Protrack Brake Pads are high performance track brake pads that provide a great bite with pedal feel from cold.
With excellent brake fade resistance and an operating temperature of 0 to 700°C, this pad posses a lower initial bite with a great pedal feel and stopping power, making them a perfect for light track use, wet conditions or for those with low grip control tyres.
Perfect for sprints, time attack and circuit racing.
When on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.
The Protrack brake pad material is 0.40 to 0.48mu, which provides progressive and predictable braking power.
Made by racing drivers for racing drivers.
Supplied as a set.
A direct fit for:
- Audi A3 1.0/1.2/1.4 TFSI 8V
- Audi A3 1.6 TDI 8V
- Audi A3 1.8 TFSI 8V
- Audi A3 1.8 TFSI Quattro 8V
- Audi A3 2.0 TDI 8V
- Audi A3 2.0 TDI Quattro 8V
- Audi A3 2.0 TFSI 8V
- Audi A3 2.0 TFSI Quattro 8V
- Audi S3 Quattro 8V
- Audi TT 1.8 TFSI 8S
- Audi TT 2.0 TDI 8S
- Audi TT 2.0 TDI Quattro 8S
- Audi TT 2.0 TFSI 8S
- Audi TT 2.0 TFSI Quattro 8S
- Audi TTS Quattro 8S
- Audi TTRS Quattro 8S
- SEAT Leon 1.2/1.4 TSI 5F
- SEAT Leon 1.6 TDI 5F
- SEAT Leon 1.8 TSI 5F
- SEAT Leon 2.0 TDI 5F
- SEAT Leon 2.0 TDI 4Drive 5F
- SEAT Leon Cupra 5F
- Volkswagen Golf 1.0/1.2 TSI 5G/MK7
- Volkswagen Golf 1.4 GTE Hybrid 5G/MK7
- Volkswagen Golf 1.4 TSI 5G/MK7
- Volkswagen Golf 1.6 TDI 5G/MK7
- Volkswagen Golf 1.6 TSI 4Motion 5G/MK7
- Volkswagen Golf GTD 5G/MK7
- Volkswagen Golf GTI 5G/MK7
- Volkswagen Golf GTI Clubsport 5G/MK7
- Volkswagen Golf GTI TCR 5G/MK7
- Volkswagen Golf R 5G/MK7
- Volkswagen Golf e-Golf 5G/MK7
- Volkswagen Golf GTI MK8
- Volkswagen Golf R MK8
PBS Brake Pad Bedding-in Process:
PBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.
It is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.
PBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.
note: image is for illustration purposes and may differ on delivery